On Sale

QUINT POWER power supply units – highest system availability due to SFB technology Compact power supply units of the new QUINT POWER generation maximize the availability of your system. Even the standard power circuit-breakers can be tripped reliably and quickly with the SFB technology (Selective Fusebreaking Technology) and six times the nominal current for 12 ms. Defective current paths are disconnected selectively, the defect is limited and the important system parts remain in operation. A comprehensive diagnostics is carried out by continuously monitoring the output voltage and current. This preventive function monitoring visualizes the critical operating modes and reports them to the control unit before an error occurs.

For applications where field power is required for switch inputs or 2-wire transmitters, the MTL7700 range provides a bussed power feed facility. When used in conjunction with the MTL7798 power feed module the user has a fully protected, electronically fused supply to many barriers with no additional wiring required.

The E-Lite 100 is a field mounted flow computer for custody or non-custody transfer measurements. It is a single bidirectional meter run computer that can be used in gas or liquid applications. Multiple primary elements and density equations are supported. A unique graphical interface allows users to have up to three trend screens with two user selectable parameters per screen. This mimics a chart recorder display and allows users the ability to get at-a-glance information concerning their flow conditions.

The E-Lite 100 calculates all the necessary standard equations (AGA, API, ISO, NIST, etc.) for Liquids & Gases. Monthly, daily, or hourly reports are stored in flash memory. If you include the E-Lite 100’s impressively low power consumption, battery back-up capabilities, solar power options, and built-in wireless communications the E-Lite 100 proves itself to be the number one flow computer for all applications.

The E-Chart P2DAAA is a field mounted flow computer with a built in Rosemount® 205 Multivariable Transmitter (DP, P and TEMP) for custody or non-custody transfer measurements. It is a single bi-directional meter run computer that can be used in gas or liquid applications. Multiple primary elements and density equations are supported. A unique graphical interface allows users to have up to three trend screens with two user selectable parameters per screen. This mimics a chart recorder display and allows users the ability to get at-a-glance information concerning their flow conditions.

The E-Chart P2DAAA calculates all the necessary standard equations (AGA, API, ISO, NIST, etc.) for liquids & gases. Monthly, daily, or hourly reports are stored in flash memory. If you include the E-Chart P2DAAA’s impressively low power consumption, battery back-up capabilities, solar power options, and built-in wireless communications the E-Chart P2DAAA proves itself to be the number one flow computer for all applications.

In original packaging

In original packaging

Previously used

Previously used

Transducer, Temperature, 3-Way Isolation, for PT 100 Temp. Sensors, Configurable

Singlemode 

1000Mbits 

10KM 

10.5dB 

1310/1310nm

–40 to +85°C (–40 to +185°F)